![]() With the Include solid diaphragm every # layers option we can tell the Slicer to 3D print a solid layer in a certain interval of layers. If we exceed the recommended value for a 0.4mm nozzle, Simplif圓D will give us the following warning message. We would end up having a 0.6mm layer height for the Infill, which exceeds the recommended value for a 0.4mm diameter (0.32mm) nozzle. ![]() If you exceed the value, you run the risk that the infill layers will not adhere well to each other and when you exceed the recommended value, Simplif圓D will give you a warning message.įor example, suppose we have a 0.2mm layer height set, with a 0.4mm nozzle, and we try to set the Combine Infill Every # Layers value to 3. With 3 layers you would already be printing the infill at a layer height of 0.3mm. If you have a 0.4mm nozzle, and you are printing at 0.1mm layer height, you shouldn’t combine more than 3 layers of Infill. This option is used to deposit filling at every certain layer height, to speed up the 3D printing time.įor example, if your Layer Height is 0.1mm, and you decide to combine the Infill every 3 layers, you will end up printing a 0.3mm Infill every three layers.Īs with the layer height, the limitation is based on the diameter of the nozzle, the ideal is not to exceed a layer height greater than 80% of the diameter of the nozzle.įor example, if you have a 0.4mm nozzle, you shouldn’t exceed a layer height of 0.32mm. Difference between using 2mm and 6mm in Infill Extrusion Width Combine Infill Every # Layers
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |